DIELECTRIC / HIGH-VOLTAGE TEST
介电击穿与绝缘电阻测试:耐压、漏电与验收准备Dielectric breakdown and insulation-resistance testing: voltage, leakage and acceptance
把“能耐多少伏、会不会漏”转换成结构、电极、偏压、限流、环境与失效判据都可执行的测试单。Turn “how much voltage can it withstand?” into an executable structure, electrode, bias, compliance, environment and failure plan.
这类测试解决什么问题What this testing addresses
绝缘电阻与漏电测试关注在约定电压、时间和环境下的电流或电阻;击穿测试则关注在受控偏压过程中何时出现不可恢复导通或其他预先约定的失效现象。两者都必须连同电极面积、介质厚度、边缘场、升压方式和限流一起解释。单一“耐压”数字不能脱离样品几何、测试时间和失效定义比较。Insulation resistance and leakage describe current or resistance at an agreed voltage, duration and environment. Breakdown testing records an agreed irreversible conduction or other failure during controlled bias. Electrode area, dielectric thickness, edge field, ramp and current compliance are part of the result.
适合什么需求Good For
适合介质薄膜、电容结构、栅介质、钝化层、绝缘间隙或封装绝缘路径的筛查与工艺比较;也适合将研发样品的漏电、耐压、击穿或保持时间需求,提前转成可追溯的测试计划。For dielectric films, capacitors, gate dielectrics, passivation, isolation gaps and package insulation paths; also for turning leakage, withstand, breakdown or hold-time questions into traceable tests.
需要准备什么Prepare First
提供截面或版图、材料栈和名义厚度、电极材料与面积、焊盘位置、样品数量、目标电压范围、直流/脉冲/阶梯或斜坡偏压、保持时间、限流、测试温湿度、允许的探针接触区域,以及需要的原始 I–V、时间曲线、击穿电压、击穿场强或失效图片。Provide cross-section or layout, stack and nominal thickness, electrode material and area, pads, sample count, voltage range, DC/pulse/step/ramp bias, dwell, current compliance, temperature/humidity, probe-contact zones and required raw traces.
常见风险Common Risks
边缘电场集中、探针划伤、表面污染、保护环或背电极定义不清、限流设置不当、升压速率不同、残余电荷未放尽,以及把一次破坏性击穿当成长期可靠性结论,都会使样品或数据不可比。高压或储能结构应由具备相应安全条件的测试平台执行。Edge-field crowding, probe damage, contamination, unclear guard/back electrodes, unsuitable compliance, different ramp rates, residual charge and treating one destructive breakdown as lifetime evidence can invalidate comparisons. Qualified facilities must handle high-voltage or stored-energy tests.
怎样写清送样与验收Make handoff and acceptance explicit
在图纸上标出高压端、回流端、接地、保护环和禁止接触区域;明确测量前是否需要烘烤、静置或放电。验收建议区分:仪器与连接可追溯、偏压/限流/时间符合测试单、原始曲线完整、以及按项目阈值得到的合格或失效判定。若需换算击穿场强,应明确实际介质厚度、有效电极区域和换算规则;由测试平台确认方法的适用性与不确定度。Mark high, return, ground, guard and no-contact regions; state any bake, rest or discharge. Separate traceable setup, bias/compliance/time execution, complete raw traces and project-threshold disposition. Define actual thickness, active electrode region and conversion rules before reporting breakdown field.
与已有电学测试页的边界Boundary with related electrical pages
本页聚焦绝缘路径的受控耐压、绝缘电阻和击穿判据,不替代低电流器件筛查。低电流 I–V 与漏电排查可先看半导体漏电流测试;栅介质的 C–V 结构与提取看MOS 电容 C–V 测试;普通直流端口接触和曲线准备看探针台 I–V 电学测试。若目标是寿命或可靠性,应另行约定循环、应力与统计样本方案。This page covers controlled withstand, insulation-resistance and breakdown criteria for insulation paths, not generic low-current screening. See the leakage-current, MOS C–V and probe-station I–V pages for those distinct intents. Lifetime and reliability need their own stress and statistical plan.
官方资料Official references
核查日期:2026-11-13。以下资料用于说明绝缘测试的通用安全、偏压与校准概念;本文清单为素微项目沟通建议,不构成任何平台能力、电压范围、可靠性或不确定度承诺。Checked November 13, 2026. These references support general insulation-test safety, bias and calibration concepts; this checklist is project guidance, not a capability, voltage, reliability or uncertainty claim.