TEMPERATURE CYCLING / RELIABILITY

温度循环可靠性测试:热循环、失效筛查与验收准备Temperature-cycling reliability: thermal cycling, failure screening and acceptance

把“冷热循环后还是否正常”转换成样品状态、温度谱、循环程序、监测节点与失效判据都可执行的测试单。Turn “will it still work after hot and cold cycling?” into an executable sample state, profile, monitoring and failure plan.

这类测试解决什么问题What this testing addresses

温度循环让样品在预先约定的高低温之间重复转换,用于筛查材料与结构热膨胀不匹配、互连/封装界面疲劳、裂纹、分层及相关电学漂移风险。它不等于高温存储、通电寿命、湿热或热冲击;是否带偏压、温度范围、转换方式和循环数都应由应用场景与适用规范共同确定。Temperature cycling repeatedly transitions a sample between agreed hot and cold limits to screen for thermal-expansion mismatch, interface fatigue, cracks, delamination and related electrical drift. It is distinct from high-temperature storage, powered life, humidity and thermal shock.

01

适合什么需求Good For

适合芯片封装、MEMS、传感器、柔性互连、薄膜器件或装配样品,在环境变温后的结构与功能筛查;也适合把可靠性预研从一句“做热循环”整理成可比的测试计划。For packaged chips, MEMS, sensors, flexible interconnects, thin-film devices and assemblies needing structural or functional screening after temperature excursions.

02

需要准备什么Prepare First

提供样品/封装状态、材料与关键界面、数量和编号、允许夹持区、工作与存储温度、拟用高低温点、升降温或转换要求、驻留时间、循环数、是否带电、预检/中检/后检项目,以及需要的原始温度记录、电学数据、显微图片或失效分析交付。Provide sample/package state, materials and critical interfaces, IDs and quantity, fixture limits, use/storage temperatures, proposed limits, transition requirements, dwells, cycles, bias, checks and requested raw records.

03

常见风险Common Risks

只写温度范围而不写样品实际温度、驻留、转换或循环定义,会使结果无法复现;夹具遮挡气流、样品结露、连接线受力、批次混淆、测试前后方法不一致,也可能把工装问题误判成样品失效。温度循环的通过不构成寿命、车规或任何应用保证。A temperature range without sample temperature, dwell, transition or cycle definition is not reproducible. Fixture issues and changed inspection methods can create false failures. Passing a cycle test is not a lifetime or application guarantee.

怎样写清送样与验收Make handoff and acceptance explicit

先定义一枚样品经历什么才算一个循环,并记录腔体设定和代表性样品温度的关系。验收建议分开写:样品身份与装夹可追溯、程序和实际温度记录完整、各测试节点使用同一或已声明等效的方法、外观/电学/功能/截面等失效判据,以及异常样品是否做复测或失效分析。若采用 JESD、MIL、AEC 或客户规范,应以该版本、样品形态和实验室可执行条件为准。Define what one cycle means for the sample and document the chamber setting versus representative sample temperature. Keep traceability, profile records, comparable inspection methods, failure criteria and retest/failure-analysis rules separate.

与已有测试页的边界Boundary with related testing

本页聚焦环境温度反复转换后的可靠性筛查,不替代稳态散热或局部热点测量;后者可看热阻测试与红外热成像。若重点是密封腔体漏率,见气密性与泄漏测试;若要确认键合界面在应力后的力学表现,见键合强度测试。This page concerns reliability screening after repeated environmental temperature transitions, not steady-state heat flow, leak testing or bond-strength testing.

官方资料Official references

核查日期:2026-11-15。以下资料用于说明温度循环与可靠性测试的通用概念;本文清单为素微项目沟通建议,不构成任何测试能力、规范符合性、可靠性或寿命承诺。Checked November 15, 2026. These references support general temperature-cycling concepts; this checklist is project guidance, not a test-capability, compliance, reliability or lifetime claim.